The “DEUCE” can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Dark Gray, Black and Blue. Professional ATI test results show the SnoBlox Deuce held up to 3456 pounds when screw mounted and 1379 pounds when adhesive mounted using the SB-190. All tests were performed simulating realistic snow loading conditions applied to face of the guard.
Based on the proven Snojax II design, the Icejax II is the new improved version of the original adhesive mounted clear polycarbonate snow guard. This patented design still features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Use the flat side down on a 5" flat surface or simply flip the unit over to straddle a small minor rib. Starter points are provided on both sides for mechanically fastening with self-drilling screws. Professional ATI test results show the Icejax II held and astonishing 6388 pounds when screw mounted and a mind blowing 1561 pounds when adhesive mounted using the Surebond SB-190. All tests were performed simulating realistic snow loading conditions applied to face of the guard.
Invented in 1976, Snojax I is the “original” clear snow guard that may only be mechanically fastened through the roof sheet into a structural purlin or support below. Because of the unique rib straddling design, they fit most brands of screwed-down 36" panels with three 12" flats or four 9" flats. The distinctive 8 holes in the face plate provide exceptional water drainage.